info@ajl-hzxiaoluan.com

+86-571-82135908

Product Categories
Contact Us

Address: Dijing Business Street 129, Hezhuang Street, Xiaoshan District, Hangzhou City, Zhejaing Province, China

TEL: +86-571-82135908

FAX: +86-571-82135898

E-mail: info@ajl-hzxiaoluan.com

Website: www.ajl-hzxiaoluan.com

Home > Exhibition > Content
How to replace the brake pads Apr 08, 2017

1. Release the handbrake and loosen the hub screw that will need to change the brake wheel (note that it is loose and do not completely screw it down). Jack up with a jack. Then remove the tires. Before moving the brake, it is best to use a special brake cleaning fluid spray in the brake system to spray, to avoid powder into the respiratory tract, affecting health.

2. Remove the screw of the brake calipers (for some cars, simply remove one of them and then loosen the other)

3. Attach the brakes to the rope to avoid damage to the brake line. Then remove the old brake pads.

4. Use the c-type clamp to push the brake piston back to the inside. (Please note that before this step, first set off the hood, the brake oil box cover unscrew, because the top brake piston, the brake fluid surface will rise). Install the new brakes.

5. Pull the brake caliper back and the caliper screw to the required torque. Tighten the tires and tighten the hub screws slightly.

6. Lower the jack and tighten the hub screws.

7. Because in the process of changing the brake pads, we will brake the top of the piston to the inside, just start when the brakes will be empty. After a few steps on the just fine.